Carbon monoxide emitters with channels - CtrlWorks.net

Home /All Products /Smart Sensors /Carbon monoxide emitters with channels

Carbon monoxide emitters with channels

Smart Sensors

Basic parameters of CO2 line sensors

Application: Automatic control of ventilation systems in garages, workshops and other places.
Detection: Electrochemical principle, accuracy ± (3~5) ppm, response <10 sec.
Output: 4~20mA / 0~10V / RS485 (communication distance 1200 meters).
Environment: Operation -10~60℃, Storage -40~70℃, IP protection.
Installation: Pipe flow probe, standard calibration

$23.00 - $38.00

Wired carbon monoxide sensors/transmitters are used to detect and monitor carbon monoxide concentrations in the environment in order to control ventilation systems and effectively reduce energy consumption in compliance with building ventilation, energy efficiency and related standards. In buildings such as garages or workshops where cars are serviced and operated, the ventilation system must be switched on and off depending on the usage of the ventilation system, or the ventilation system must be operated and monitored automatically depending on the CO concentration.

Conductive carbon monoxide sensor/transmitter adopts environmentally friendly imported electrochemical gas sensors, with a variety of output signals to choose from, and conductive installation is equipped with a leakage computer probe. It can meet the requirements of various measuring environments and various measurements with high precision and good stability.

Carbon Monoxide Lead Sensor	Measurement accuracy		±3ppm+3%, ±5ppm+5%. <10s Standard Calibration
	Output Settings	Output signal :	4～20 mA 0～10VDC
	485 Output Parameters	Signal Type: RS485 type:	RS485 serial output Multi-point, half-duplex 2 wires, max. connection distance 1200 meters, direct connection to the terminal.
	Working environment	Working Environment	Temperature -10~+60°C Humidity 0~95% RH, no condensation.
		Storage Ambient:	Temperature -40~+70°C Humidity 0~95% RH, non-condensing