Contact Us
CW Dimming Unit
intelligent building

Basic settings for multi-protocol dimming modules

  • Adaptive Light Source: Fully supports dimming of incandescent, halogen, low voltage halogen and LED light sources.
  • Protection features:
    • Soft Protection: Supports scene/smooth switching (extends bulb life).
    • Overcurrent Protection: Automatically shuts off excess power (protects the integrity of the device).
  • Most important settings :
    • Power consumption : 180 mA @ 12V.
    • Operating temperature: -10℃~50
    • Relay output: Single 250VAC/16A ( 20A model optional).
    • COM port baud rate: 1200~115200 bps
$150.00 - $180.00

Meets dimming requirements for incandescent, halogen, low voltage halogen and LED light sources.
Smooth Protection: Smooth transitions for each scene switch and lamp switch to extend bulb life.
Overcurrent Protection: Automatically shuts off when rated power increases to protect equipment.

Product Parameter Table
Power Consumption Temperature during operation Storage temperature and humidity COM connection baud rate Relay Output
180mA @ 12V -10~50°C 0%~95% Relative Humidity (non-condensing) 1200~115200 bps Mono 250VAC/16A (20V optional)
Product Model List
Product Model Power Supply Switch Input Relay Output Dimmer Output Dimming Current Fieldbus
CW.RYT0604O2 Independent power supply (optional) 6 0 4 2 Basnet/Pyxus
CW.RYT0604O4 Separate power supply (optional) 6 0 4 4 Basnet/Pyxus
CW.RYT0604O6 Separate power supply (optional) 6 0 4 6 Basnet/Pyxus
CW.RYT060410 Separate power supply (optional) 6 0 4 10 Basnet/Pyxus
CW.RYT060412 Separate power supply (optional) 6 0 4 12 Basnet/Pyxus
CW.RYT04.2.1 Independent power supply (optional) 4 x 1A LED dimmable, 2 x 2A front end dimmable. Pacnet/Pyxus
CW.RYT04PWM Standalone power supply (optional) PWM output for 4-channel LED dimming, LEDs use constant voltage with direct regulation. Bacnet/Pyxos
CW.RYT.DL Standalone power supply (optional) DALI protocol output that must be matched to the appropriate driver. Bacnet/Pyxos