Contact Us
Home /All Products /Network Infrastructure /CW-PAG-F1R18,Uplink Gigabit,16+2 ports POE switch,1SFP optical port
CW-PAG-F1R18,Uplink Gigabit,16+2 ports POE switch,1SFP optical port
Network Infrastructure

16+2+1 Port Gigabit PoE Switch

  • Port Configuration: 16 PoE ports (single port ≤ 30W) + 2 Gigabit electrical ports + 1 Gigabit optical port (optional module)
  • Power supply capacity: total PoE power of the whole machine 250W, can be fully loaded for 8 sets of 30W equipment
  • Performance: unmanaged plug and play, backplane bandwidth 14.4Gbps, packet forwarding rate 10.7Mpps
  • Transmission: Electrical port ≤ 250 meters (Cat5e+), optical port support 20km/550m (single-mode/multimode)
  • Design: Built-in power supply, no fan 0 noise, size 270×180×42mm, 2 years warranty
$24.00 - $32.00

Gigabit Uplink 16+2+1 Port POE Switch (GB 250W) Technical Specifications

1. Core parameters

  • Model: Gigabit uplink 16+2+1-port POE switch (16 electrical ports + 2 electrical ports + 1 optical port)
  • Certification standards: in line with China’s national standards (GB/T-250W), the entire POE power 250W (warranty 2 years)
  • Uplink interface: 2 Gigabit electrical ports + 1 Gigabit SFP optical port (supports hot-swap)
  • Management type: unmanaged (plug and play)

2. Port Configuration

  • POE electrical port: 16 10/100/1000Mbps adaptive RJ45 ports
    • Single-port POE power ≤ 30W (IEEE 802.3at standard)
    • Total POE power of the whole machine 250W (can simultaneously power eight 30W devices at full load)
  • Uplink port:
    • 2 Gigabit electrical ports (for stacking or uplink connection)
    • 1 Gigabit SFP optical port (supports single-mode/multi-mode modules, transmission distance optional 20km/550m)

3. Performance indicators

  • Backplane bandwidth: 14.4Gbps (non-blocking switching architecture)
  • Switching capacity: 28.8Gbps (full wire-speed forwarding)
  • Packet Forwarding Rate: 10.7Mpps
  • Transmission Distance:
    • Electrical port ≤ 250 meters (Cat5e and above cable)
    • Optical port supports single-mode 20km/multi-mode 550m (optional corresponding module required)
  • VLAN support: no port VLAN support (basic Layer 2 switching)

4. Power supply and energy efficiency

  • Input power: AC 100-240V (built-in power supply)
  • Overall power consumption: ≤250W at full load POE, standby power consumption <10W
  • POE protocol: support IEEE 802.3af/at (automatic detection of PD devices)

5. Physical characteristics

  • Size: 270×180×42mm (desktop/rack dual-use design)
  • Weight: 2.3kg (with built-in power supply)
  • Heat dissipation design: fanless passive cooling, working noise 0dB
  • Protection grade: IP40 (dustproof design)

6. Environmental adaptability

  • Operating Temperature: 0℃~45
  • Storage temperature: -40℃~70
  • Humidity range: 10%~90% RH (non-condensing dew)

7. Safety and Reliability

  • POE Protection: Over-current/Short-circuit/overheat automatic power-off protection
  • Surge Protection: 6KV Ethernet port lightning strike prevention
  • Warranty service: 2 years limited warranty