




Rotary Wire Stripper
Cabinet System
Products
Rotary Wire StripperCabinet SystemCtrlWorks Cabinet System
- Can be used as a 110-type punch-down tool.
- Rotate three turns to strip off the plastic outer jacket of twisted pair cable.
- Stripping without damaging inner conductors.
Ordering Information
Model No. | Product Name |
G601 | Rotary Wire Stripper |
Related Recommendations
Cabinet System

5-in-1 Cable Tester
Cabinet System
- This 5-in-1 multifunctional tester supports testing network cables, telephone lines, BNC coaxial cables, USB print cables and F-type TV coaxial cables.
- It realizes intelligent testing for network cables, telephone lines, USB wires and TV cables.
- No waiting required to test continuity status.
- Equipped with automatic scanning detection: intelligently identify continuity, short circuit, open circuit and crossover faults, indicated by corresponding signal indicator lights.
- Auto power-off if left idle for 5 seconds.

Cable Management Rack
Cabinet System
- Two knock-out cable entry holes at the top and bottom.
- The door opening direction can be freely adjusted as required, with a maximum opening angle greater than 180 degrees.
- Quick-opening side panels for convenient equipment installation and maintenance.
- The mounting depth of the rack rails can be adjusted back and forth as required.
- Pre-installed earthing studs; fans are available as an optional accessory.

M12 Leveling Foot
Cabinet System
- Fixed at the four corners of the cabinet to compensate for uneven floors
- Static flat load per foot: 400KG
- Material: 45# steel block / reinforced nylon
- Color: galvanized / black

Visual Fault Locator (Fiber Optic Tester)
Cabinet System
- This pocket-sized optical fiber visual fault locator adopts a 650nm laser emitter with output power above 1mW, suitable for detecting single-mode and multi-mode optical fibers. It is powered by common AAA batteries, equipped with efficient DC-DC power management for long continuous working hours and low power consumption. Compact in design and fitted with an impact-resistant protective sleeve.
- Equipped with universal output port, compatible with standard 2.5mm fiber connectors such as SC/FC/ST. It can test various types of fiber jumpers, ribbon fibers and pigtails, serving as an ideal tool for fiber network construction and maintenance.
- Adopts high-performance quantum well LD light source.
- Intelligent switch design for better energy efficiency.
- Freely switchable between CW / MOD operating modes.
- Strong laser beam enables long-distance detection.
- Small and lightweight, easy to carry.











