Key Specifications of Multi-Protocol Dimming Modules

• Compatible Light Sources: Fully supports dimming of incandescent, halogen, low-voltage halogen, and LED light sources
• Protection Features:
  • Soft Protection: Scene switching and on/off operations support smooth transitions (extending lamp lifespan)
  • Overcurrent Protection: Automatic shutdown upon exceeding rated power (ensures module safety)
• Key Specifications:
  • Power Consumption: 180mA @ 12V
  • Operating Temperature: -10°C to 50°C
  • Relay Output: Single channel 250VAC/16A (20A model available)
  • COM Port Baud Rate: 1200–115,200 bps

CW Series Intelligent Switch Acquisition Module

The CW series modules are designed for all types of switch sensors and can be connected to infrared motion detection, curtain detection, infrared counters, door magnets, window magnets, smoke sensors, gas alarms and general switch panels. Three models are available: 5-channel (CW.DI05), 16-channel (CW.DI16), and 16-input + 16-output (CW.1616G) to meet the needs of different sized applications.

The modules are independently powered with an operating voltage of 12 V and power consumption of only 180 mA. They are suitable for wide temperature environments from -10°C to 50°C. They support Bacnet/Pyxos fieldbus protocols for seamless integration into building automation and intelligent security systems, and the COM ports have an adjustable transmission speed (1200~115200 bps) to ensure stable and reliable data transmission. Suitable for smart home, industrial automation, security monitoring and other scenarios, providing flexible and efficient solutions for switching and control signals.

Basic characteristics of ducted CO₂ sensors/transmitters

• Application Scenarios: Intelligent buildings, HVAC systems (e.g. airports, subway stations, garages, etc.), automatic control of ventilation systems based on CO2 concentration, reduction of energy consumption.
• Sensing Principle: Near Infrared (NDIR) technology, high precision, no interference.
• Accuracy range: ± (30~50) ppm + (3%~10%), response time less than 10 seconds, automatic calibration.
• Output Signal
  • Analog: 4~20mA, 0~10VDC.
  • Digital signal: RS485 (half duplex, 2-wire, communication distance ≤ 1200 meters).
• Environmental adaptability :
  • Operating temperature: -10℃~60℃, humidity 0~95% RH (non-condensing).
  • Storage temperature : -40℃~70

Basic parameters of CO2 line sensors

• Application: Automatic control of ventilation systems in garages, workshops and other places.
• Detection: Electrochemical principle, accuracy ± (3~5) ppm, response <10 sec.
• Output: 4~20mA / 0~10V / RS485 (communication distance 1200 meters).
• Environment: Operation -10~60℃, Storage -40~70℃, IP protection.
• Installation: Pipe flow probe, standard calibration

• Application: End control of central air conditioning systems for VAV/ventilation/cooling.
• Torque options: 8/16/24/32 Nm .
• Control modes
  • Switch type: 2-point control / 3-point control.
  • Control mode: 0-10 V / 4-20 mA analog.
• Feedback signal: 0-10 V / 4-20 mA (optional auxiliary switch).
• Environmental adaptability operation -20~50

CW.IDS Microwave Detector Basic Settings

• Detection principle: Active microwave sensing, 360° detection (radius adjustable from 1 meter to 8 meters).
• Applicable loads: monitoring/alarm/LED lighting/extractor fan, etc. (power ≥ 0.2W).
• Penetration ability: can be used through doors/windows/walls.
• Environmental adaptability: working voltage DC12-24V, light control 10-500LUX.
• Energy-saving mode: automatic time-delayed shutdown when there is no cell phone signal.

CW.MAC3 Level MAC3 Basic Key Parameters

• Principle: Mechanical float switch, operating angle ±45°.
• Load capacity: 10A/250V～380V (micro switch)
• Durability IP68 protection class, switch life ≥ 50,000 cycles.
• Environmental adaptability: Operating temperature 0-50°C, storage temperature -20-80
• Application: Liquid pump control / submerged pump protection, alarm current ≤ 50mA.

CW-702 Basic Settings for Water Pipe Temperature Transmitter

• Application: Air conditioning water system/chiller temperature measurement/treated water for various environments.
• Accuracy: ±0.3℃/±0.5℃/±1℃ (Response 2-5 minutes).
• Output: 4-20mA/0-10V/RS485 (connection distance 1200 meters).
• Protection grade : IP grade, working temperature -20~80℃ (anti-condensation design).
• Installation: Multi-probe length optional, need to support the fuselage protection.

PM2.5 Basic parameters of indoor sensors

• Detection principle: Optical particle counting (1 µm particles +) with an accuracy of ± 10 µg/m³ ± 10 %.
• Output signal 4-20mA/0-5V/0-10V/RS485 (Modbus protocol, 1200 meters connection).
• Environmental adaptability: working temperature -10~60℃ (20-80% RH), response time 15 minutes.
• Application Scenario: Intelligent Building/Air Conditioning/HVAC/Heating and Cooling System, support factory/office environment monitoring.
• Calibration and Maintenance: Standard calibration, IP protection (anti-condensation design).

CW-301 Pressure Transmitter Basic Parameters

• Measuring range: liquid/gas pressure (compatible with 316L material)
• Accuracy level: ±0.25%FS/±0.5%FS/±1%FS optional
• Output signal: 4-20mA/0-5V/0-10V/RS485 (Modbus protocol)
• Structural features miniaturized design, multiple interface options, corrosion-resistant customization.
• Installation and maintenance: ready to install, IP rating

CW-905 Basic settings for the light level transmitter.

• Measuring range: 0 – 200,000 lux (visible light 400 – 700 nm), response time <5 seconds.
• Accuracy ±3% ~ ±10% of visible light Optional IP65 degree of protection (with waterproof connector).
• Output signals 4-20mA/0-10V/RS485 (Modbus protocol, address adjustable).
• Installation features Compact and portable, universal for indoor and outdoor, supports communication code/software configuration.
• Connection configuration: baud rate 1200-38400 bps (standard 9600), data format 8N2.

Basic Parameters of CW-601 Temperature and Humidity Transmitter

• Measurement performance: temperature ±0.3℃~±1℃, humidity ±2%~±5%RH (response within 2-5 minutes).
• Protection design: polymer filter, moisture-proof and dust-proof, prolonging service life.
• Output signal: 4-20mA/0-10V/RS485 (industrial standard interface).
• Application Scenario: HVAC/Engine room/Agriculture/Biopharmaceutical and other environmental control.
• Installation features: ducted probe design for dusty and humid environments.

Basic Parameters of CW-811 Oxygen Transmitter

• Sensing principle: electrochemical sensor, accuracy ±2%FS, response time ≤10 seconds
• Range option 1PPM / 0.1%V / 0.01%V Accuracy
• Output signal: 4-20mA / 0-5V / 0-10V / RS485 (industry standard interface).
• Typical applications: medical/laboratory/air-conditioning systems, supporting automatic ventilation control.
• Environmental adaptability: IP protection class, working temperature -10~50℃.

CW-809 VOC Transmitter Basic Settings

• Gas Detection: Toluene/Ammonia/Alcohol and other VOCs, including temperature and humidity compensation.
• Sensor: Metal Oxide Semiconductor, Service life: 5-7 years.
• Performance: Accuracy ±3%~5%FS, Response time 60 seconds (T90).
• Ausgang: 4-20mA/0-5V/0-10V/RS485.
• Stabilization time: 15 minutes warm-up time, energy-saving design.

Transmitter Basic Setup CO₂ CW-808

• Sensing Principle: NDIR infrared technology, Accuracy ± (30~50) ppm ± (3%~10%).
• Response speed: <10 seconds, can be auto-calibrated.
• Output signal: 4-20mA/0-5V/0-10V/RS485 (industrial standard interface).
• Intelligent control: automatically start and stop the ventilation system according to CO2 concentration.
• Applicable scenes: garage/workshop/intelligent building, energy-saving ventilation system control.

CW-807 CO Transmitter Basic Settings

• Sensing principle: Electrochemical sensor, accuracy ± (3~5) ppm ± (3%~5%).
• Response speed: <10s, support 4-20mA / 0-5V / 0-10V / RS485 output.
• Connection security: carbon dioxide exceeds the standard, automatically start the fresh air system operation.
• Applicable scenes: garage/building/station and other indoor scenes.
• Stability: Imported sensor chip, long-term reliable.

CW-801 Temperature and Humidity Transmitter Basic Settings

• Measurement accuracy: temperature ±0.3℃~±1℃, humidity ±2%~±5%RH (response 2-5 minutes).
• Display function: industrial LCD screen, real-time display of temperature and humidity data.
• Output signal: 4-20mA/0-5V/0-10V/RS485 (industrial standard interface).
• Installation features: small and exquisite, ready to install, suitable for PLC/inverter and other equipment.
• Application Scenario: Indoor environment with high requirements for temperature and humidity.

16+2+1-Port Gigabit PoE Switch

• Port Configuration: 16 PoE ports (≤30W per port) + 2 Gigabit Ethernet ports + 1 Gigabit fiber port (module required)
• Power Capacity: Total PoE power output of 250W, capable of fully powering 8 devices at 30W each
• Performance: Unmanaged plug-and-play, 14.4 Gbps backplane bandwidth, 10.7 Mpps packet forwarding rate
• Transmission: Wired ports ≤ 250 meters (Cat5e+); fiber ports support 20 km/550 m (single-mode/multi-mode)
• Design: Built-in power supply, fanless and silent operation, dimensions 270 × 180 × 42 mm, 2-year warranty

24+4-Port Gigabit PoE Switch

• Port Configuration: 24 PoE ports (≤30W per port) + 2 Gigabit Ethernet ports + 2 Gigabit fiber ports (module required)
• Power Capacity: Total system PoE power output of 400W, capable of fully powering 13 devices at 30W each
• Performance: 56 Gbps backplane bandwidth, 41.7 Mpps packet forwarding rate, supports 4K VLANs
• Management: Basic Web/CLI management, supports SNMP and redundant power supply expansion
• Design: 1U rack-mount (440×180×44mm), intelligent temperature-controlled fans (noise <40dB), 6KV surge protection, 2-year warranty

100Mbps 4+2-Port PoE Switch

• Port Configuration: 4 PoE Ethernet ports (≤30W per port) + 2 100Mbps fiber ports (supports 20km single-mode / 550m multi-mode)
• Power Delivery Capability: Total PoE power output of 65W; supports IEEE 802.3af/at standards; capable of simultaneously powering multiple devices
• ​​Transmission Performance​​:
  • Ethernet ports support long-distance transmission up to 250 meters (Cat5e/Cat6 cables)
  • Backplane bandwidth: 1.6 Gbps; supports port-based VLAN isolation
• Industrial Design:
  • Operating temperature: -10°C to 55°C; IP30 dust protection; metal housing for heat dissipation
  • External power supply (AC 100–240 V), total power consumption ≤65 W, standby <5 W
• Safety and Warranty: Overcurrent/short-circuit/overheat protection; CE/FCC/RoHS certified; 2-year warranty